TRACK FEED BATTERY CHARGER For D. C. Track Circuit in Railway Signaling
RDSO / Spec No.
IRS:S:89/2013
Application
Indian Railways (S&T Sector) - DC Track Circuits & Battery Backup Systems
Product Specifications & Details
The Track Feed Battery Charger manufactured by General Auto Electric Corporation (GAEC) is specifically engineered for DC Track Circuits in Railway Signaling. Designed and approved in strict compliance with RDSO Specification No. IRS:S:89/2013 (Lucknow – Indian Railways), this charger is suitable for charging 1, 2, 3, or 4 lead-acid cells rated for 40 AH or 80 AH capacities. Featuring robust construction, ON/OFF rotary control, manual cell selection, and potential-free contacts for remote alarm monitoring, it provides highly reliable power for critical track circuit installations.
Key System Features
- Flexible Battery Charging: Suitable for charging 1, 2, 3, or 4 lead-acid cells.
- Capacity Support: Supports cell ratings of 40 AH or 80 AH with charger capacities of 5 A and 10 A.
- User Controls: Dedicated ON / OFF rotary switch and manual Cell Selection switch.
- Status Indications: Clear ON indication and Charger Fail alerts.
- Remote Monitoring: Includes potential-free contacts for remote indication integration.
- RDSO Approved: Fully certified under RDSO Lucknow for Indian Railways signalling.
Technical Specifications Table
| Parameter | Specification Standard |
|---|---|
| Nominal Input Voltage | 110 V AC |
| Input Variation & Frequency | Selection taps at 90V, 100V | 50 Hz ± 2Hz |
| Nominal Output Voltage | 1.6 V/cell to 1.9 V/cell (At 50% rated current) |
| Efficiency & Regulation | < 50% on Rated load at Max cell | Transformer Regulation < 5% at Max output |
| No Load Current | < 10% of the Max Rated input current |
| Operating Temp / Rise | -10°C to 50°C; RH < 90% (Non-condensing) | Temp Rise < 55°C above ambient |
| Insulation Voltage | 2 kV between Input/Output, Input/Earth, and Output/Earth for 1 minute |
| Insulation Resistance & Class | > 10 MΩ (Charger), 100 MΩ (Transformer) | Insulation Class “B” |
| Dimensions (Max) | L: 300 mm, W: 200 mm, H: 200 mm |
Ordering Codes
- TFBC.01.40: Track Feed Battery Charger suitable for 40AH Cells
- TFBC.01.80: Track Feed Battery Charger suitable for 80AH Cells
Related Products
More equipment from Power Equipment
IRS:S:86/2000
Automatic Float Cum Boost Battery Charger
The Automatic Float Cum Boost Battery Charger manufactured by General Auto Electric Corporation (GAEC) is engineered specifically for severe environments across the Indian Railways network. Built in compliance with RDSO Specification No. IRS:S:86/2000, it maintains power for critical Railway Signaling and Telecom installations—including Relays, Point Machines, Data Loggers, Axle Counters, and Control Circuits. The unit […]
IRS: S: 91/2014
Transformer Rectifier Set
The Transformer Rectifier Set manufactured by General Auto Electric Corporation (GAEC) is engineered for heavy-duty DC power requirements across Indian Railways signalling networks. Fully compliant and approved under RDSO Specification No. IRS: S: 91/2014 (Lucknow), this unit integrates a full-wave bridge rectifier with a low-ripple filter circuit (`< 5% RMS`). Featuring off-load input/output voltage selection, […]
IRS/S/65/83
B Type Choke For D. C. Track Circuit in Railway Signalling
The B Type Choke manufactured by General Auto Electric Corporation (GAEC) is specifically engineered for DC Track Circuits used in Railway Signalling. Designed in strict compliance with RDSO Specification No. IRS/S/65/83, this unit serves as a vital protective device for DC track circuits operating on 25 KV, 50 Hz AC electrified train routes. It provides […]